6 January 1999. SMS. VAXstation 2000 External RX33 Floppy Disk Cable This document describes an extension cable which permits an external RX33 floppy disk drive to be used with a VAXstation 2000. This extension cable runs from the internal connector intended for an internal floppy disk drive to an external connector in the (unused) third hole in the rear panel of the expansion box at the base of the CPU box. The internal floppy disk drive connector is a 34-conductor card-edge connector on the three-way split ribbon cable in the CPU box. The external connector is a 37-pin two-row female D connector (DB37S). This assumes that the external floppy disk drive has a corresponding connector and cable arrangement. All odd conductors on the card edge are ground. Floppy DB37S card- (rear edge view) nc 1 +- 1 20 | 2 2 +- 3 21 polarizing \ | 4 3 key/slot / +- 5 22 | 6 4 +- 7 23 | 8 5 +- 9 24 | 10 6 +- 11 25 | 12 7 +- 13 26 | 14 8 +- 15 27 | 16 9 +- 17 28 | 18 10 +- 19 29 | 20 11 +- 21 30 | 22 12 +- 23 31 | 24 13 +- 25 32 | 26 14 +- 27 33 | 28 15 +- 29 34 | 30 16 +- 31 35 | 32 17 +- 33 36 34 18 nc 37 nc 19
Follow this link to more VAXstation 2000 material.